- 电压击穿试验仪
- 介电常数
- 电阻率测试仪
- 粉末电阻率测试仪
- 导体、半导体电阻率
- 耐电弧测试仪
- 漏电起痕试验仪
- 落球回弹试验仪,介电击穿强度测定仪:电池隔膜电弱点测试仪
- 橡胶塑料检测仪器
- 力学性能检测仪器
- 海绵泡沫材料检测仪器
- 受电弓/碳滑板检测仪器
- 材料热物理性能实验设备
- 热物性检测仪器
-
粉末测试设备
-
霍尔流速计
-
真密度测试仪
-
斯柯特容量计
-
休止角测定仪
-
粉末压实密度仪
-
振实密度测试仪
-
颗粒图像分析仪
-
全自动真密度仪
-
塑料流动性测定仪
-
粉尘安息角测试仪
-
落球回弹试验仪,介电击穿强度测定仪:多功能压力测量系统
-
落球回弹试验仪,介电击穿强度测定仪:粉末自然堆积密度仪
-
粉体综合物性测试仪
-
氧化铝流动角测定仪
-
塑料表观密度测试仪
-
落球回弹试验仪,介电击穿强度测定仪:普通磨料堆积密度仪
-
白土堆积密度测定仪
-
落球回弹试验仪,介电击穿强度测定仪:氧化铝流动时间测定仪
-
落球回弹试验仪,介电击穿强度测定仪:压实密度粉末电阻率仪
-
落球回弹试验仪,介电击穿强度测定仪:陶粒砂体积密度测定仪
-
氧化铝松装密度测定仪
-
落球回弹试验仪,介电击穿强度测定仪:表面活性剂表观密度仪
-
落球回弹试验仪,介电击穿强度测定仪:自由流动堆积密度测定仪
-
落球回弹试验仪,介电击穿强度测定仪:超硬材料堆积密度测定仪
-
霍尔流速计
- 比表面测试仪
- 电池检测
- 燃烧性能试验机
- 金属检测仪器
-
焙烧炉试验机
ASTMD495耐高压低电流电弧放电试验机
高交流电压小电流量实验设计仪(耐弧光实验设计仪)-(电子计算机调整)
High voltage low current tester (arc resistance tester) - (computer control)
车辆名稱:耐电弧试验机
Product name: electric arc resistance tester
產品尺寸:NDH-A
Product model: NDH - A
够满足条件:GB/T 1411-2002《液体绝缘层建筑材料耐高低平电流值焊弧击穿的耐压试验》(同等IEC 61621-1997)及ASTM D495等标准的规范要求设汁手工制造的,并遵循IEC 149、UL
Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc
一 概述
一An overview of the
其主要采用面积及基本功能:
本经过多次实验发现机是明确适用到无刷电机、电商产品和家居电商产品等餐饮行业的技工用塑、光敏环氧树脂胶和隔绝漆等隔绝用料的耐焊弧焊接性评比,主用到粉状隔绝用料如:塑、贴膜、光敏环氧树脂、矿石、瓷质、安全玻璃、隔绝油、隔绝漆、硬纸板等物质的耐焊弧焊接性测试测试;
本疲劳测试仪由来工控机设定自动运行,需要表现如今工作设计心态及工作设计日期,工作设计停止后并保存图片如今工作设计统计资料,并可彩打.的标准进行实验评估。
Main scope of application and features:
This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;
This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report
二 功能特点
1 该设备为左右侧一体机结构设计,下处为作业设计,上方为实验室检测箱。
2 本成品利用*新智能化掌握技术工艺,利用选取程序流程图(IEC或ASTM)可一键对其进行试验台,并在笔记本手机连接电脑表示试验检测方式和效果。
3 **技能正常,抗电磁干扰技能强,測試计算精度较高。
二:Functional features:
1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.
2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.
3 good safety performance, strong anti-interference ability, high test precision.
三 主要技术参数
1 弧光通断事件差值:不低于 ±10ms
2 调压器体积:2kVA
3 固定冲击试验交流电压:12.5kV
4 冲击试验线电压计算精度:±3%
5 电压电流把控精密度:±10% 电压校正表面粗糙度:1.5%
6 电极材料对制样重压:(0.5±0.05)N
7 电极原料原料:钨棒
8 金属电极距離:(6.35±0.1)mm(IEC)
(6.0±0.1)mm(ASTM)
9 用室内环境室内温度:(23±2)℃
10 的使用氛围含水率:(50±5)%
11 电源线:220V±5% 50Hz
12 实验设计 技巧: 国家标准/美标/10 mA 陆续/20 mA 累计/30 mA连续性/40 mA连继
13 校正系统一下:
| 系统程序段 | 焊弧电流量 mA | 脉冲通断日期s | 各过程段持续保持时刻s | 可靠性试验总时候s | |
| | | IEC 61621 | ASTM D495 | | |
| 1 | 10 | 1/8s通 7/8s断 | 1/4s通 7/4s断 | 60 | 60 |
| 2 | 10 | 1/4s通 3/4s断 | 1/4s通 3/4s断 | 60 | 120 |
| 3 | 10 | 1/4s通 1/4s断 | 1/4s通 1/4s断 | 60 | 180 |
| 4 | 10 | 连续性通 | 60 | 240 | |
| 5 | 20 | 间断通 | 60 | 300 | |
| 6 | 30 | 反复通 | 60 | 360 | |
| 7 | 40 | 重复通 | 60 | 420 | |
Three main technical parameters:
Error: 1 arc on-off time less than plus or minus 10 ms
Transformer capacity: 2 kva
3 test voltage rating: 12.5 kV
4: test voltage accuracy + / - 3%
5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%
6 electrode pressure on sample: (0.5 + 0.5) N
7 electrode materials: tungsten rods
8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)
9 using the environment temperature (23 + 2) ℃
10 use environment humidity: (50 + 5) %
Power supply: 220 v + 5% for 50 hz 10 a
Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous
13 test procedure is as follows:
Procedures section of the arc current
MA arc on-off time s the program s test total duration time s
IEC 61621 ASTM D495
1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s
2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s
3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s
4 consecutive 10 to 60, 240
5 20 consecutive 60, 300
30 consecutive 6 to 60, 360
7 consecutive 40 to 60, 420
四 配置
| 序号顺序 | 标题 | 总数量 | 注 |
| 01 | 耐焊弧各种测试仪器 | 一套 | |
| 02 | 电极片系统 | 一项 | |
| 03 | 电极材料网架支座 | 两套 | |
| 04 | 交流电源线缆 | 设计一套 | |
| 05 | 接地线放** | 每支 | |
| 06 | 直流电毫安表 | 一个 | |
| 07 | 手机测控软文 | 一个 | |
| 08 | 试件架 | 一只 | |
| 09 | 探针间距准则块 | 2块 | |
| 10 | 方面规则块 | 2块 | |
| 11 | 工业陶瓷片 | 2片 | |
| 12 | 喷墨直接针式打印机 | 1台 | 品牌标志 |
| 13 | 求算机 | 1台 | 茶叶品牌 |
| 14 | 利用就操作说明 | 1份 | |
| 15 | 通过证 | 1份 | |
Four configuration:
Serial number name number note
01 arc resistance tester
02 a electrode system
03 electrode bearing a set
04 a set of power cable
05 ground put a rod
06 milliammeter current one
7 a set of computer measurement and control software
08 specimen holder a
09 electrode distance standard 2 blocks
Standard 2 blocks of 10 Angle
11 ceramic pieces 2 pieces
12 one brand inkjet printer
13 1 computer brand
14 1 instruction manual
15 1 certificate
五 护肤品形号:
NDH-A 耐电弧放电测试仪-微机掌控
NDH-B 耐电弧焊接校正仪-触感屏操控
Five product model:
NDH - A arc resistance tester - microcomputer control
NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询!